Name: SN74CB3Q3306APWRG4
Brand: Texas Instruments
SKU: SN74CB3Q3306APWRG4
Price: 0.43000 USD
Availability: InStock

new-10%

SN74CB3Q3306APWRG4

Manufacturer part number:SN74CB3Q3306APWRG4

Manufacturer:Texas Instruments

Description:8 Terminations2.3V~3.6V 8 Pin 74CB3Q3306 Signal switch74CB Series 2 Functions

Case Package:SOT-23

Datasheet:SN74CB3Q3306APWRG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Type	Bus Switch
Resistance	9Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Base Part Number	74CB3Q3306
Pin Count	8
Circuit	1 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Number of Channels	2
Number of Ports	2
Nominal Supply Current	250μA
Output Current	30mA
Number of Bits	1
Propagation Delay	6.5 ns
Quiescent Current	700μA
Turn On Delay Time	6.5 ns
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Output Polarity	TRUE
High Level Output Current	-64mA
Low Level Output Current	64mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3Q3306APWRG4 Product Details

SN74CB3Q3306APWRG4 Overview

In order to save board space, digital switch is located in the 8-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Bus Switch is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CB series can be used for a wide range of applications.There are 8 terminations included in its basic configuration.There is a base part number 74CB3Q3306 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch consists of 8 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.This multiplexer ic has 8 pins configured.The mount is in Surface Mount.Signal multiplexer contains 1 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without the influence of external factors, it consumes 700μA current of multiplexer ic.TR is used to package the switches.As far as the resistance is concerned, it operates with 2.With a resistance of 9Ohm, it operates.This turn signal switch's circuit is based on a circuit with 2 channels.For greater switches' flexibility, 30mA provides the output current.