SN74CB3Q3306APWG4 Overview
Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.It is designed with 8 terminations as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch consists of 8 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 8 pins is used.The mounting point is Surface Mount.As a result, signal multiplexer provides a total of 1 bits.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 700μA current of multiplexer ic.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 9Ohm.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Device specifications require that the minimum supply voltage is 2.3V.The mux switch configuration contains 2 elements.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CB3Q3306APWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
SN74CB3Q3306APWG4 Applications
There are a lot of Texas Instruments
SN74CB3Q3306APWG4 Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
- Combinational circuit
- Logic gates for other digital devices
- Signal router
