SN74CB3Q16811DL Overview
For the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in the way of Tube.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.As parts of its basic configuration, 56 terminations are desgined.There is a base part number 74CB3Q16811 that can be used to locate signal switch's related components as well.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.Currently, it is configured with a 56 pin configuration.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer provides 24 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3mA current of multiplexer ic.A resistance of 2 governs its operation.A resistance of 9Ohm is used to operate the signal switching.Additionally, it improves the characteristics of ALSO OPERATES AT 3.3V SUPPLY.For higher switches' flexibility, the output current is set to 30mA.
SN74CB3Q16811DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY
SN74CB3Q16811DL Applications
There are a lot of Texas Instruments SN74CB3Q16811DL Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Small scale TV wall
- GLAN
- Enabling block of memory depending on address in memory chips
- Image transmission
- Data distribution
- RF-based home automation system
- A robotic vehicle with the metal detector
- Code conversion
- To select different devices in microprocessor input
