SN74CB3Q16211DLR Overview
In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CB series can be used for a wide range of applications.It is designed with 56 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CB3Q16211 may also be used.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 56 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 56 pin configuration.It is positioned in the direction of Surface Mount.Signal multiplexer consists of 24 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.It consumes 3mA current of multiplexer ic without external influences.The switches package is packaged in a way which is consistent with TR.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 9Ohm.Higher switches' flexibility is provided by providing 30mA as the output current.
SN74CB3Q16211DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CB3Q16211DLR Applications
There are a lot of Texas Instruments SN74CB3Q16211DLR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- A robotic vehicle with the metal detector
- RF-based home automation system
- Electronically controlled engine system
- Recording transmission
- Solenoid cooling fan
- Automatic health monitoring systems
- Data distribution
- Enabling block of memory depending on address in memory chips
- Data collection system
