SN74BCT574N Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74BCTseries comprises this type of FPGA. You should not exceed 77MHzin the output frequency of the device. The element count is 1 . There is a consumption of 8mAof quiescent energy. There have been 20 terminations. The 74BCT574 family contains it. It is powered from a supply voltage of 5V. Its input capacitance is 5.5pFfarads. A device of this type belongs to the family of BCT/FBT. It is mounted in the way of Through Hole. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part designed with 8bits is used in this application. 8 circuits are used to achieve its superior flexibility. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports. Optimal efficiency requires a supply voltage of 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. There are no output lines on the JK flip flop.
SN74BCT574N Features
Tube package
74BCT series
20 pins
8 Bits
5V power supplies
SN74BCT574N Applications
There are a lot of Texas Instruments SN74BCT574N Flip Flops applications.
- Control circuits
- Guaranteed simultaneous switching noise level
- Frequency Dividers
- Safety Clamp
- Event Detectors
- Instrumentation
- Test & Measurement
- Common Clocks
- Automotive
- Data transfer
