SN74AUC1G66DBVR Overview
Shipping overseas is convenient with the electronic component packed in SC-74A, SOT-753. This high-reliability packaging method uses advanced packaging methods Cut Tape (CT). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 5 terminations. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 1.65V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 5 pins. A SPST - NO switching circuit is used for these analog switches. 74AUC1G66 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. Datasheets for 5 pin functions are available upon request. It is normally recommended that users do not supply the multiplexer with voltages higher than 2.7V. Single supply type digital switch with a low cost. It is recommended to use 800mV as the lowest voltage for the electrical part. The switch device would be able to operate with 10μA current. A voltage of 0.8V~2.7V is required for this switch device, which drains from a single voltage source. It may damage the digital multiplexer if the voltage is higher than 10μA. The transfer of data can be performed over 170MHz bandwidths.
SN74AUC1G66DBVR Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 50MHz
Bandwidth: 170MHz
SN74AUC1G66DBVR Applications
There are a lot of Texas Instruments SN74AUC1G66DBVR Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Channel Banks
- Sample-and-hold systems
- Communications systems
- Industrial and process control systems
- Avionics
- Communication systems
- Fault Tolerant Systems
- Precision test equipment
- Multiplexers
