SN74AS175BD Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74AS series. Its output frequency should not exceed 100MHz Hz. A total of 1elements are contained within it. Despite external influences, it consumes 34mAof quiescent current. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AS175 family contains this object. A voltage of 5V is used as the power supply for this D latch. In terms of electronic devices, this device belongs to the ASfamily of devices. There is an electronic part mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. Its superior flexibility is attributed to its use of 7 circuits. The D latch operates on 5V volts. For high efficiency, the supply voltage should be kept at 5V. The 20mA output current allows it to be designed with the greatest amount of flexibility. It is designed with 2 output lines. It has 3lines.
SN74AS175BD Features
Tube package
74AS series
16 pins
5V power supplies
SN74AS175BD Applications
There are a lot of Texas Instruments SN74AS175BD Flip Flops applications.
- QML qualified product
- Patented noise
- Common Clocks
- Buffer registers
- Set-reset capability
- EMI reduction circuitry
- Single Up Count-Control Line
- Control circuits
- ESD protection
- Bounce elimination switch
