SN74ALS573CDWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of 0°C~70°C is set as the operating temperature. In the 74ALS series, this FPGA is located. There are 8 bits in this electronic part. This device has been designed with 20 terminations available. The family it belongs to is 74ALS573. It operates with a supply voltage of 5V. It has 20 pins that makes it easy to use. There is a device in this electronic family called ALS. With the design of the board, there are only 20 pins. This electronic part is mounted in the way of Surface Mount. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. 5V power supplies are needed to operate it. Input Lines consist of electronic circuits, and there are 3. This device is well suited for TR based on its reliable performance. The 24mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 16mA of quiescent current without being affected by outside factors.
SN74ALS573CDWR Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS573 family
20 pin count
20 pins
5V power supplies
SN74ALS573CDWR Applications
There are a lot of Texas Instruments SN74ALS573CDWR Latches applications.
- Synchronous frequency dividers
- Parallel Input
- Instrumentation
- Display driver
- Serial Output Data Queuing
- Flip-flops
- Multistage ripple counting
- TV Set-top Boxes
- Clocks
- Stacked or Push-Down Registers
