SN74ALS569ANSRG4 Overview
The device is packaged in the 20-SOIC (0.209, 5.30mm Width)type. This configuration uses 20terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 20. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 20pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74ALSseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~70°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. It is important to note that TCO OUTPUT; CLOCKED CARRY OUTPUTare really important features of this electronic device. Further related parts may be found under the base part number 74ALS569. For its packaging, TAPE AND REELis employed. From the voltage source, there is a voltage of 5V volts. To operate, the device requires a voltage of [0].
SN74ALS569ANSRG4 Features
Embedded in the 20-SOIC (0.209, 5.30mm Width) package
4 bits per element
TCO OUTPUT; CLOCKED CARRY OUTPUT
Operating supply voltage of 5.5V
SN74ALS569ANSRG4 Applications
There are a lot of Texas Instruments
SN74ALS569ANSRG4 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
