SN74ALS112AD Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tubepackage. In the configuration, Differentialis used as the output. This trigger uses the value Negative Edge. There is an electronic component mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis considered to be the operating temperature. A flip flop of this type is classified as a JK Type. In this case, it is a type of FPGA belonging to the 74ALS series. Its output frequency should not exceed 30MHz. This process consumes 4.5mA quiescents. There are 16 terminations,The 74ALS112 family contains this object. It is powered by a voltage of 5V . A device of this type belongs to the family of ALS. Electronic part Surface Mountis mounted in the way. There are 16pins on it. There is a clock edge trigger type of Negative Edgeon this device. It is included in FF/Latches. 2 circuits are used to achieve its superior flexibility. The D latch operates on 5V volts. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 8mA . It has 5lines.
SN74ALS112AD Features
Tube package
74ALS series
16 pins
5V power supplies
SN74ALS112AD Applications
There are a lot of Texas Instruments SN74ALS112AD Flip Flops applications.
- QML qualified product
- Test & Measurement
- Modulo – n – counter
- Frequency division
- Memory
- Supports Live Insertion
- Registers
- Parallel data storage
- Safety Clamp
- Convert a momentary switch to a toggle switch
