SN74AHCT74PW Overview
The package is in the form of 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Differential. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -40°C~125°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74AHCT series. You should not exceed 140MHzin its output frequency. As a result, it consumes 2μA quiescent current and is not affected by external forces. There have been 14 terminations. This D latch belongs to the family of 74AHCT74. Power is supplied from a voltage of 5V volts. Its input capacitance is 2pFfarads. A device of this type belongs to the family of AHCT/VHCT/VT. Electronic part Surface Mountis mounted in the way. The 14pins are designed into the board. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. It operates from 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 8mA. As of now, there are 4input lines.
SN74AHCT74PW Features
Tube package
74AHCT series
14 pins
5V power supplies
SN74AHCT74PW Applications
There are a lot of Texas Instruments SN74AHCT74PW Flip Flops applications.
- Storage Registers
- Latch
- Latch-up performance
- Dynamic threshold performance
- Clock pulse
- Patented noise
- Bus hold
- Modulo – n – counter
- Buffered Clock
- High Performance Logic for test systems
