SN74AHCT574DBRE4 Overview
SSOPis the way it is packaged. It is included in the package Tape & Reel (TR). There are 20 terminations,Power is supplied from a voltage of 5V volts. AHCT/VHCT/VTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 8bits are used in this part. To achieve this superior flexibility, 8 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 5V watts. The flip flop has 2ports embedded within it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 1 output lines on it. Currently, there are 3 lines of input. There is -8mA output current at the high level. There is 8mA output current at the low level. It is recommended that the operating temperature be lower than 125°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. 115MHzis the maximum frequency that can be achieved. This logic IC is BUS DRIVER. A total of 1 functions are provided by this T flip flop. With 20 pins, it is equipped with a low power consumption.
SN74AHCT574DBRE4 Features
Tape & Reel (TR) package
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
SN74AHCT574DBRE4 Applications
There are a lot of Texas Instruments
SN74AHCT574DBRE4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
