SN74AHCT125NE4 Overview
The PDIP package is neat. In order to package this voltage buffer, the Rail/Tube external package is used. We use all 4 elements. The ethernet transceiver has 14 terminations with different functions. There is a voltage requirement of 5V. Electronic parts from the AHCT/VHCT/VT family are used in this part. A total of 14 pins are included with the electric component. This logical driver can be used in Through Hole different applications. The pin count is 14. 2 ports are included in this logic device. Each element uses 1 bits. Bus Driver/Transceivers is a specific type of buffer. As long as the electronic component is in the quiescent state, it uses 2μA. Use a 5V power supply if possible. When running the electronic part in a circuit, it is recommended that users apply 5V supply voltage. Operating temperatures as low as -40°C are possible. No more than 125°C should be the ambient temperature when automotive buffer is operating. In its low-level output mode, it outputs 8mA. When operating in high-level output mode, the electronic component can conduct up to -8mA. At the very least, the voltage used to operate this electrical component should be at least 4.5V. There is a 5.5V maximum supply voltage rating on it. BUS DRIVER logic ICs are called that. Under ENABLE LOW control, the logical driver starts up.
SN74AHCT125NE4 Features
Bus Driver/Transceivers
High Level Output: 8mA
Low Level Output: -8mA
BUS DRIVER Logic IC
SN74AHCT125NE4 Applications
There are a lot of Texas Instruments
SN74AHCT125NE4 Buffers & Transceivers applications.
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
