SN74AHC574N Overview
20-DIP (0.300, 7.62mm)is the packaging method. It is included in the package Tube. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 115MHz Hz. In total, it contains 1 elements. During its operation, it consumes 4μA quiescent energy. It has been determined that there have been 20 terminations. The object belongs to the 74AHC574 family. It is powered by a voltage of 3.3V . This JK flip flop has a 3pFfarad input capacitance. This D flip flop belongs to the family of AHC/VHC/H/U/V. The electronic part is mounted in the way of Through Hole. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. Normally, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. There are 2 ports embedded in the flip flops. This T flip flop features a maximum design flexibility due to its output current of 8mA. This input has 3lines.
SN74AHC574N Features
Tube package
74AHC series
20 pins
8 Bits
SN74AHC574N Applications
There are a lot of Texas Instruments SN74AHC574N Flip Flops applications.
- Storage registers
- Latch
- Supports Live Insertion
- Divide a clock signal by 2 or 4
- Single Up Count-Control Line
- Frequency Divider circuits
- Bus hold
- Latch-up performance
- ATE
- Communications
