SN74ACT563DW Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. A package of Tube has been used. It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series is associated with this FPGA. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. The family it belongs to is 74ACT563. With the supply voltage set at 5V, it is able to operate. The device is equipped with 20 pins. This electronic device is categorized as a ACT electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. There are electronic circuits attached to the 3 input lines. With an output current of 24mA, it is highly flexible in terms of design. A high efficiency supply voltage should be maintained at 5V. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74ACT563DW Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies
SN74ACT563DW Applications
There are a lot of Texas Instruments SN74ACT563DW Latches applications.
- Pseudo-random code generators
- Parallel data synchronization
- A/D and D/A conversion
- Automotive Infotainment
- Counter timers
- Communication systems
- Parallel data storage
- Stacked or Push-Down Registers
- Serial Output Register
- BCD counting
