SN74ACT373DWE4 Overview
The package in which it is embedded is named SOIC. This package has the format of Rail/Tube. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of ACT. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. A high level of efficiency is achieved by maintaining the supply voltage at 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. It is set to zero for the low level output current. It is set to zero for the high level output current. Ideally, the temperature should not be higher than 85°C. A temperature greater than -40°C should be used as the operating temperature. There is a maximum supply voltage of 5.5V supported by this device. This device requires a minimum voltage of 4.5V. As for the logic IC it uses, it is a BUS DRIVER. Its output current of 24mA ensures maximum design flexibility.
SN74ACT373DWE4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ACT373DWE4 Applications
There are a lot of Texas Instruments
SN74ACT373DWE4 Latches applications.
- Parallel data storage
- Digital bus buffer
- Flip-flops
- Parallel data synchronization
- Parallel data storage
- Shift register
- Pattern generators
- Automotive Infotainment
- Automotive Cluster
- Automotive ADAS
