SN74ABT534APW Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. As part of the package Tube, it is embedded. Tri-State, Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74ABT series. You should not exceed 175MHzin its output frequency. The element count is 1 . It consumes 250μA of quiescent current without being affected by external factors. Terminations are 20. Members of the 74ABT534family make up this object. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 3.5pF farads. ABTis the family of this D flip flop. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. Using 8 circuits, it is highly flexible. The D latch runs on a voltage of 5V volts. The flip flop has 2embedded ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74ABT534APW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534APW Applications
There are a lot of Texas Instruments SN74ABT534APW Flip Flops applications.
- Common Clocks
- Modulo – n – counter
- Memory
- Digital electronics systems
- Latch
- Registers
- Frequency division
- Set-reset capability
- Shift registers
- Balanced Propagation Delays
