SN74ABT374APW Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74ABT series. In order for it to function properly, its output frequency should not exceed 200MHz. In total, it contains 1 elements. T flip flop consumes 250μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74ABT374. Power is supplied from a voltage of 5V volts. A JK flip flop with a 3.5pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ABTfamily. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 8bits are used in this part. In order to achieve its superior flexibility, 8 circuits are used. The D latch operates on 5V volts. The flip flop contains 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Featuring the maximum design flexibility, it has an output current of 64mA . There are no output lines on the JK flip flop.
SN74ABT374APW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT374APW Applications
There are a lot of Texas Instruments SN74ABT374APW Flip Flops applications.
- Automotive
- Instrumentation
- Guaranteed simultaneous switching noise level
- Supports Live Insertion
- Divide a clock signal by 2 or 4
- Test & Measurement
- ATE
- Storage registers
- EMI reduction circuitry
- Computing
