SN74ABT16373ADLG4 Overview
In the package SSOP, it can be found. A Rail/Tube package is used to package it. An electronic part with 8 bits is designed. A device such as this has 48 terminations designed. In order to operate it, the supply voltage must be 5V. 48 pins are included. This electronic device is categorized as a ABT electronic device. Designed with 48 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. The system is powered by 5V sources. It consists of 16 input lines from which an electronic circuit can be built. Optimal efficiency requires 5V as the supply voltage. In total, it has 2 elements. In order to operate properly, its maximum power current (ICC) should be 85mA. In the low level output current, the value is set to 32mA. In the high level output current, the value is set to -32mA. It is recommended that the operating temperature not exceed 85°C. Temperatures above -40°C should be used. The supply voltage is limited to 5.5V. A minimal voltage of 4.5V is needed to operate it. There is a logic IC BUS DRIVER used in the system. It features maximum flexibility in design due to 64mA output current.
SN74ABT16373ADLG4 Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements
SN74ABT16373ADLG4 Applications
There are a lot of Texas Instruments
SN74ABT16373ADLG4 Latches applications.
- Motor Drives
- PCs and Notebooks
- Hammer
- Parallel data storage
- Digital bus buffer
- Flip-flops
- Parallel data synchronization
- Parallel data storage
- Shift register
- Pattern generators
