Name: SN65LVDS1DBVR
Brand: Texas Instruments
SKU: SN65LVDS1DBVR
Price: 1.75000 USD
Availability: InStock

new-10%

SN65LVDS1DBVR

Manufacturer part number:SN65LVDS1DBVR

Manufacturer:Texas Instruments

Description:5 Terminations3.3V 5 Pin 65LVDS1 Receivers1 Bits 1/0 Drivers/Receivers1 Functions

Case Package:SOT-23

Datasheet:SN65LVDS1DBVR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	16 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Weight	13.012431mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	65LVDS
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Driver
Max Power Dissipation	725mW
Technology	TTL
Voltage - Supply	2.4V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	65LVDS1
Pin Count	5
Operating Supply Voltage	3.3V
Operating Supply Current	7mA
Power Dissipation	385mW
Propagation Delay	3.1 ns
Turn On Delay Time	3.1 ns
Max Output Voltage	454mV
Data Rate	630Mbps
Output Characteristics	DIFFRENTIAL
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	LVDS
Input Characteristics	STANDARD
Number of Drivers/Receivers	1/0
Driver Number of Bits	1
Max Input Current	20μA
Interface Standard	EIA-644-A; TIA-644-A
Receive Delay-Max	3.6 ns
Supply Voltage1-Nom	3.3V
Output Low Current-Max	0.008A
Number of Receivers	1
Out Swing-Min	0.2 V
High Level Input Current-Max	0.00002A
Ambient Temperature Range High	85°C
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN65LVDS1DBVR Product Details

SN65LVDS1DBVR Overview

With the enhanced SC-74A, SOT-753 package, this driver IC is excellent for driving common LEDs.Cut Tape (CT) package is used for this receiver.The Driver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A power supply of 2.4V~3.6V is used by this differential driver.The field can have up to 1/0 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 3.3V supply voltages efficiently.5 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 5 pinouts available on this transceiver which are market standard.Since the part number 65LVDS1 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.This is a 5-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.The module isolated transceiver contains 1 receivers.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 7mA.This line driver integrating circuit represents a power-saving technique that is part of the 65LVDS series.