SN64BCT757DWG4 Overview
The SOIC package is neat. We use all 2 elements. The ethernet transceiver has 20 terminations with different functions. There is a voltage requirement of 5V. Electronic parts from the BCT/FBT family are used in this part. A total of 20 pins are included with the electric component. This logical driver can be used in Surface Mount different applications. The pin count is 20. 2 ports are included in this logic device. Each element uses 4 bits. Use a 5V power supply if possible. When running the electronic part in a circuit, it is recommended that users apply 5V supply voltage. Operating temperatures as low as -40°C are possible. No more than 85°C should be the ambient temperature when automotive buffer is operating. In its low-level output mode, it outputs 64mA. When operating in high-level output mode, the electronic component can conduct up to -100μA. At the very least, the voltage used to operate this electrical component should be at least 4.5V. There is a 5.5V maximum supply voltage rating on it. BUS DRIVER logic ICs are called that. As long as 8 outputs are produced, then it is sufficient. Under ENABLE LOW/HIGH control, the logical driver starts up.
SN64BCT757DWG4 Features
High Level Output: 64mA
Low Level Output: -100μA
BUS DRIVER Logic IC
SN64BCT757DWG4 Applications
There are a lot of Texas Instruments
SN64BCT757DWG4 Buffers & Transceivers applications.
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
