SN54LS595J Overview
CDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. A Rail/Tube case is used to pack it. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Through Hole. There is an electronic component in the LS. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED. Devices with voltage delivery capabilities of 5V are available. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. Ideally, it should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.5V.
SN54LS595J Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN54LS595J Applications
There are a lot of Texas Instruments
SN54LS595J Shift Registers applications.
- Data Processors
- Pseudo Random Pattern Generator
- Pulse Extenders
- Pattern Recognizers
- Interconnectors
- Counter
- Data manipulation
- Delay Line
- Generate time delay toward digital circuits
- Parallel data
