SE555P Overview
There is a 8-DIP (0.300, 7.62mm) that comes with the timer clock, which is enclosed in the packaging. In this case, the programmable timer's frequency is set to 100kHz.It is used to pack in Tube case. It is recommended to mount in type Through Hole.When a programmable timer is configured to operate at 4.5V~18V volts, the voltage that is supplied can be 4.5V~18V.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is -55°C~125°C. To mount this digital timer with Through Hole. The operating supply voltage is rated at 10mA voltage. It is based on SE555. The timer clock contains 8 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 440.409842mg in weight. The timer clock runs quiescent current at 12mA. The number of Timers/Counters on the device is 1.
SE555P Features
Operate frequency at 100kHz
Package / Case: Tube
Mounting Type:Through Hole
Quiescent Current at 12mA
1 Timers/Counters
SE555P Applications
There are a lot of Texas Instruments SE555P Programmable Timers & Oscillators applications.
- Tamper Detection
- Periodic “Wake-Up” Call
- Sensor Node
- Remote Sensors
- Intruder Detection
- Intruder Detection
- Precision timing
- Long Time One Shot
- Always On Systems
- Clutch Actuator circuit
