SA5532DRE4 Overview
It is packaged in an D-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 500μV for input offset voltage. A supply current of 8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 100dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 15V. In order to conduct this part, you will need to provide dual supply voltages of 15V volts.
SA5532DRE4 Features
8 Pins
supply voltage of 15V
100dB voltage gain
SA5532DRE4 Applications
There are a lot of Texas Instruments
SA5532DRE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
