RC4560IPWG4 Overview
There is a TSSOP case package that contains the instrumentation amplifiers. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 500μV. Using a supply current of 4.3mA , this buffer op amp will be able to operate. The voltage gain should stay at 100dB. As far as the device is concerned, buffer amplifier has 2 channels. To operate this buffer amplifier, the temperature must not be lower than -40°C. You should not use op amp above 85°C degrees. An buffer amplifier is packed in a TUBE-shape according to the design. This electric component can work from a voltage of under 32V as far as supply voltage is concerned. It is advised to keep the op amp's supply voltage higher than 4V. The dual supply voltage of 16V should be used for the conduct of this electronic component.
RC4560IPWG4 Features
8 Pins
supply voltage of 15V
100dB voltage gain
RC4560IPWG4 Applications
There are a lot of Texas Instruments RC4560IPWG4 Instrumentational OP Amps applications.
- Vehicle electronics
- Video computer boards
- Thermocouples
- Signal transformation
- Hand-held batteries
- Computer workstations
- Test equipment
- Proportional operation circuits
- Video data acquisition
- Navigation
