PGA207UAE4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a INSTRUMENTATION AMPLIFIER-type. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Instrumentation Amplifier op amp ic can be identified by the fact that this is a type of Instrumentation Amplifier device. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 1mV for input offset voltage. A supply current of 12.4mA can be used to operate this linear amplifier. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 3 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 9V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The quiescent current is 12.4mA. This op amp ic can conduct a minimum voltage gain of 1.
PGA207UAE4 Features
16 Pins
supply voltage of 15V
PGA207UAE4 Applications
There are a lot of Texas Instruments
PGA207UAE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
