PGA204APG4 Overview
There is a PDIP case package that contains the instrumentation amplifiers. This is a INSTRUMENTATION AMPLIFIER type op amp. There have been a total of 16 terminations over the past year. Buffer amplifier has a total of 16 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Instrumentation Amplifier device. The op amp ic has an array of 16 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 25μV. Operational amplifier can operate supply current at 5.2mA. Keeping the voltage gain at 60dB is the best course of action. Buffer op amp is equipped with 1 channels on the device. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier shouldn't be used above 85°C . There are 3 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. A voltage of 9V or higher is recommended for the linear amplifier's supply voltage. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. Buffer amplifier has a quiescent current of 5.2mA. Instrumentation amplifier resistance should remain within the range of 10GOhm.
PGA204APG4 Features
16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
PGA204APG4 Applications
There are a lot of Texas Instruments PGA204APG4 Instrumentational OP Amps applications.
- Proportional counter tubes
- PDA
- Power transmission
- Portable electronic products powered by batteries
- Active probe
- Multiplication circuits
- Signal transformation
- Comparator
- Instrumentation
- Weighing systems
