PCA9515ADGKTG4 Overview
To make transportation easier, the power buffer is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In Tape & Reel (TR) packages, ready for power buffer.An easy-to-adapt universal mount.In terms of types, this is a typical Buffer, ReDriver.The op amp buffer uses a voltage of 2.3V~3.6V volts for its operation.As a result, 1 channels collaborate to maintain output quality.As a result of this, there is no input facilitation.It is recommended that the operating temperature is set to -40°C~85°C to prevent malfunctions.This operational amplifier buffer targets at I2C and other applications.There are more pin-to-pin solutions available for your special needs if you search with the letter "CA9515".An op amp buffer with 8 terminals can be found on the left side of the op amp buffer.There is a peak reflow temperature for this alloy of 260 degrees Celsius.The splitter works with a voltage of 3V, so it can be used for various demanding tasks.A Power buffer's pinout is determined by the number of pins that it has and starts with 8.In 2-Wire Bus, it outputs.With 8 pins, it is connected.Power buffers like this one play a critical role in the industry.In order for this power buffer to operate, a voltage of 500μA must be applied.Operating voltage 3.6V is required for normal operation.There are a total of 2 outputs supported.
PCA9515ADGKTG4 Features
1 channels.
Mainly used in I2C.
A standard Line Driver or Receivers.
2 outputs.
PCA9515ADGKTG4 Applications
There are a lot of Texas Instruments PCA9515ADGKTG4 Signal Buffers, Repeaters, Splitters applications.
- Add/Drop Muxes
- Portable IPC/HMI
- Protection Switching
- Digital Cross-Connects
- Industrial/Embedded PC
- Cable Repeaters
- Desktop Computers
- Industrial PCs
- Test Equipment
- Loopback
