OPA890IDBVT Overview
A SOT-23-6 case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 6 terminations in the next few months. It consists of a total of 6 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 6 pins on this chip. The input offset voltage is 5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.1mA and 10 . You should keep the voltage gain at 60dB for the time being. There are 1 channels on the operational amplifiers. For packing the buffer amplifier, the TR-axis is adopted.
OPA890IDBVT Features
6 Pins
supply voltage of 5V
60dB voltage gain
OPA890IDBVT Applications
There are a lot of Texas Instruments OPA890IDBVT Instrumentational OP Amps applications.
- Multiplication circuits
- Television broadcasting equipment
- Fission chambers
- Logarithmic operation circuits
- Tablets
- Radiation thermometry transducers
- Band-pass filter
- Signal amplification
- Thermocouples
- Signal filtering
