Name: OPA695IDG4
Brand: Texas Instruments
SKU: OPA695IDG4
Availability: InStock

new-10%

OPA695IDG4

Manufacturer part number:OPA695IDG4

Manufacturer:Texas Instruments

Description:1 Channels 120mA per Channel 20μA 51 dB Instrumentational OP Amps 30μA 5V~12V ±2.5V~6V OPA695 8 Pins 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:OPA695IDG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	OPA695
Pin Count	8
Number of Channels	1
Operating Supply Current	12.9mA
Nominal Supply Current	13.3mA
Slew Rate	4300V/μs
Amplifier Type	Current Feedback
Common Mode Rejection Ratio	51 dB
Current - Input Bias	20μA
Voltage - Supply, Single/Dual (±)	5V~12V ±2.5V~6V
Output Current per Channel	120mA
Input Offset Voltage (Vos)	3mV
Bandwidth	1.7 GHz
Gain Bandwidth Product	1.7 GHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1700000 kHz
Average Bias Current-Max (IIB)	30μA
Power Supply Rejection Ratio (PSRR)	56dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6.5V
Voltage - Input Offset	300μV
Settling Time	10 ns
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	45μA
Programmable Power	NO
Neg Supply Voltage-Max (Vsup)	-6.5V
Max I/O Voltage	3mV
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA695IDG4 Product Details

OPA695IDG4 Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. A Current Feedback-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. There is an input offset voltage of 3mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. This op amp can operate from a supply current at 12.9mA. Buffer op amp is equipped with 1 channels on the device.