OPA690IDBVT Overview
It is packaged in an SOT-23-6-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. The op amp is delivered to you in a Cut Tape (CT) case. The number of terminations is approaching the 6 mark. In this case, there are 6 pins on the board. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 6 pins are present on the instrumentation amplifier. Op amp ic rates 4mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 5.5mA . There should be no change in the voltage gain. The op amp ic has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 9V. A TR-shaped amplifier is used to pack the buffer amps.
OPA690IDBVT Features
6 Pins
supply voltage of 5V
63dB voltage gain
OPA690IDBVT Applications
There are a lot of Texas Instruments OPA690IDBVT Instrumentational OP Amps applications.
- Medical imaging
- Cinema or auditorium audio system
- Micro signal measurement
- Fission chambers
- Signal transformation
- Video amplifiers
- Active probe
- Scintillation detectors
- Tablets
- pH (acidity)
