OPA551UA/2K5G4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 30V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. You should keep the voltage gain at 126dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 30V. The linear amplifier is packaged by using a TAPE AND REEL axis. This electrical part should be conducted under the dual supply voltage of 30V volts when you conduct this part.
OPA551UA/2K5G4 Features
8 Pins
supply voltage of 30V
126dB voltage gain
OPA551UA/2K5G4 Applications
There are a lot of Texas Instruments
OPA551UA/2K5G4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
