OPA4347EA/250G4 Overview
There is a TSSOP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape and Reel case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. The input offset voltage is 6mV. The buffer amplifier is capable of operating from a supply current of 20μA . There should be no change in the voltage gain at 115dB. For this linear amplifier to work, the temperature should not be below -55°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. The op amp is rated for an operating supply voltage of 4. Under 5.5V is the minimum supply voltage for this electric component. Over 2.5V is a recommended supply voltage for buffer amps
OPA4347EA/250G4 Features
14 Pins
supply voltage of 5V
115dB voltage gain
OPA4347EA/250G4 Applications
There are a lot of Texas Instruments
OPA4347EA/250G4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
