OPA4131PJG4 Overview
A PDIP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Rail/Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. An 1.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 4 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 18V. The dual supply voltage of 18V should be used for the conduct of this electronic component.
OPA4131PJG4 Features
14 Pins
supply voltage of 15V
110dB voltage gain
OPA4131PJG4 Applications
There are a lot of Texas Instruments
OPA4131PJG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
