OPA363AID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 3.6V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.5mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~125°C. An 1.1mA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 100dB is the best course of action. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The op amp is rated for an operating supply voltage of 1. The operating supply voltage of the buffer op amp is rated at 2.75V.
OPA363AID Features
8 Pins
supply voltage of 3.6V
100dB voltage gain
Output Type: Rail-to-Rail
OPA363AID Applications
There are a lot of Texas Instruments OPA363AID Instrumentational OP Amps applications.
- Micro signal measurement
- Oscilloscopes
- Measurements of Wheatstone bridge
- Voltage regulation circuit
- Polarized electrodes
- Computer workstations
- Subtraction operation circuits
- PDA
- Radiation thermometry transducers
- Video amplifiers
