OPA358AIDCKTG4 Overview
It is packaged in an SC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 6mV for input offset voltage. A supply current of 5.2mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 92dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. It is important to keep in mind that the power supply voltage of this electric component is below 3.3V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended.
OPA358AIDCKTG4 Features
6 Pins
92dB voltage gain
OPA358AIDCKTG4 Applications
There are a lot of Texas Instruments
OPA358AIDCKTG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
