OPA347NA/3KG4 Overview
In order to protect the op amps, a SOT-23 case is used. There are two types of operational amplifiers in this circuit. In the case of Tape and Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 5. It consists of a total of 5 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 5 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 6mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 20μA and 10 . Maintain 115dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -55°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125°C degrees. As a whole, there are 1 elements that make up this buffer amplifier. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5V when using it.
OPA347NA/3KG4 Features
5 Pins
supply voltage of 5V
115dB voltage gain
OPA347NA/3KG4 Applications
There are a lot of Texas Instruments
OPA347NA/3KG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
