OPA333AMDBVREPG4 Overview
There is a SOT-23 case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 5 mark. The total number of pins on linear amplifier is 5. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 5 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 10μV. It is possible to operate this buffer amplifier from a supply current of 17μA . 130dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least -55°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 2.75V. The electrical part is capable of being powered by a voltage of under 5.5V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 1.8V.
OPA333AMDBVREPG4 Features
5 Pins
supply voltage of 5V
130dB voltage gain
OPA333AMDBVREPG4 Applications
There are a lot of Texas Instruments
OPA333AMDBVREPG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
