OPA2683IDG4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3mV for input offset voltage. A supply current of 1.88mA can be used to operate this linear amplifier. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep in mind that the power supply voltage of this electric component is below 12V, which is suitable. Keeping the linear amplifier's supply voltage above 5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6V volts.
OPA2683IDG4 Features
8 Pins
OPA2683IDG4 Applications
There are a lot of Texas Instruments
OPA2683IDG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
