OPA2379AIDCNR Overview
Packaging for the buffer amplifier is in the form of a SOT-23-8 case. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 2.9μA, this op amp ic can operate. Keeping the voltage gain at 120dB is the best course of action. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. A voltage rating of 2 is indicated for the op amp's operating supply voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA2379AIDCNR Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2379AIDCNR Applications
There are a lot of Texas Instruments OPA2379AIDCNR Instrumentational OP Amps applications.
- Ultrasound transducers
- Signal filtering
- Division circuits
- Voltage regulation circuit
- Switching amplifier
- High speed sample
- ECG equipment
- earphone
- Navigation
- Mobile phone
