OPA2364IDGKRG4 Overview
Packaging for the buffer amplifier is in the form of a VSSOP case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Tape and Reel case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.6V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 900μV. Using a supply current of 1.1mA , this buffer op amp will be able to operate. 100dB should be the voltage gain. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 125°C . There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 2.75V. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 1.8V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 2.75V volts for this part.
OPA2364IDGKRG4 Features
8 Pins
supply voltage of 3.6V
100dB voltage gain
OPA2364IDGKRG4 Applications
There are a lot of Texas Instruments
OPA2364IDGKRG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
