OPA2357AIDGSRG4 Overview
There is a VSSOP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape and Reel case. We are approaching the 10h termination of the year. In total, there are 10 pins on this op amp ic. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 10 pins are located on the operational amplifiers. The input offset voltage is 8mV. The buffer amplifier is capable of operating from a supply current of 4.9mA . There should be no change in the voltage gain at 110dB. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 5V. Under 5.5V is the minimum supply voltage for this electric component. Over 2.5V is a recommended supply voltage for buffer amps
OPA2357AIDGSRG4 Features
10 Pins
110dB voltage gain
OPA2357AIDGSRG4 Applications
There are a lot of Texas Instruments
OPA2357AIDGSRG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
