OPA2348AIDCNT Overview
Packaged in a SOT-23-8 case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. A Cut Tape (CT) case is used to deliver the buffer op amp. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 45μA , this buffer op amp will be able to operate. Maintain 108dB as the voltage gain. This op amp contains 2 circuits. Buffer op amp is equipped with 2 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Use op amp only at temperatures no higher than 125°C. It is possible to count 2 elements on this buffer amplifier. A supply of 45μA or higher is recommended for use with this electronic part. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5V when using it. There are 2 amplifiers on it.
OPA2348AIDCNT Features
108dB voltage gain
Output Type: Rail-to-Rail
OPA2348AIDCNT Applications
There are a lot of Texas Instruments OPA2348AIDCNT Instrumentational OP Amps applications.
- Proportional counter tubes
- Signal transformation
- Voltage regulation circuit
- single/dual op amp sum and difference circuits
- Video conversion and routing
- Addition operation circuits
- earphone
- ECG equipment
- Navigation
- Weighing systems
