OPA2137PA Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 220μA, this op amp ic can operate. There should be no change in the voltage gain at 94dB. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. MicroAmplifier? corresponds to the op amp's series.
OPA2137PA Features
8 Pins
supply voltage of 15V
94dB voltage gain
OPA2137PA Applications
There are a lot of Texas Instruments OPA2137PA Instrumentational OP Amps applications.
- Medical instruments
- Multimedia playback equipment
- High/low-pass filter circuit
- Broadcasting
- Power transmission
- Active probe
- Proportional counter tubes
- Subtraction operation circuits
- Signal transformation
- Oscilloscopes
