Name: OPA2132UAE4
Brand: Texas Instruments
SKU: OPA2132UAE4
Availability: InStock

new-10%

OPA2132UAE4

Manufacturer part number:OPA2132UAE4

Manufacturer:Texas Instruments

Description:2 Channels 40mA per Channel 5pA 86 dB Instrumentational OP Amps 0.00005μA 5V~36V ±2.5V~18V OPA2132 8 Pins 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:OPA2132UAE4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	OPA2132
Pin Count	8
Number of Channels	2
Operating Supply Current	4mA
Nominal Supply Current	9.6mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	86 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	5V~36V ±2.5V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	2mV
Bandwidth	8MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	8000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00005μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Dual Supply Voltage	15V
Nominal Gain Bandwidth Product	8MHz
Max I/O Voltage	2mV
Power	NO
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2132UAE4 Product Details

OPA2132UAE4 Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. The number of terminations approaches 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 4mA , this buffer op amp will be able to operate. Voltage gain should remain at 120dB. 2 channels are available on the instrumentation amplifier.