OPA170AIDBVR Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 18V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.8mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 110μA, this op amp ic can operate. Keeping the voltage gain at 130dB is the best course of action. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the TR-axis is adopted.
OPA170AIDBVR Features
5 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail
OPA170AIDBVR Applications
There are a lot of Texas Instruments
OPA170AIDBVR Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
