OPA137NA/250E4 Overview
There is a SOT-23 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape & Reel case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are located on the operational amplifiers. The input offset voltage is 2.5mV. The buffer amplifier is capable of operating from a supply current of 220μA . It is recommended to keep the voltage gain at 94dB at all times. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 18V. This linear amplifier pack is based on the TR axis. Under 36V is the minimum supply voltage for this electric component. Over 4.5V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.
OPA137NA/250E4 Features
5 Pins
supply voltage of 15V
94dB voltage gain
OPA137NA/250E4 Applications
There are a lot of Texas Instruments
OPA137NA/250E4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
