OPA137N/3KE4 Overview
The linear amplifier is packaged in a SOT-23 case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. It comes in a Tape and Reel case, which protects instrumentation amplifier from damage during delivery. There have been a total of 5 terminations over the past year. In this case, there are 5 pins on the board. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. Op amp is a member of the 94dB's 94dB family. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. To pack the operational amplifier ics, TR is adopted as the packing method. With regard tp supply voltage, op amp is used under 36V. The linear amplifier's supply voltage should be higher than 4.5V. There should be a dual supply voltage of 18V for you to conduct this electrical part.
OPA137N/3KE4 Features
5 Pins
supply voltage of 15V
94dB voltage gain
OPA137N/3KE4 Applications
There are a lot of Texas Instruments
OPA137N/3KE4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
