OPA124UG4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 800μV for input offset voltage. A supply current of 2.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 125dB. This instrumentation amplifier cannot operate below -25°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TUBE-shape according to the design. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
OPA124UG4 Features
8 Pins
supply voltage of 15V
125dB voltage gain
OPA124UG4 Applications
There are a lot of Texas Instruments
OPA124UG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
