Name: NE5534DR
Brand: Texas Instruments
SKU: NE5534DR
Price: 0.98000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	NE5534
Pin Count	8
Number of Channels	1
Operating Supply Current	4mA
Nominal Supply Current	4mA
Output Current	38mA
Slew Rate	13V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500nA
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~15V
Output Current per Channel	38mA
Input Offset Voltage (Vos)	4mV
Bandwidth	10MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES AVCL>=3
Supply Voltage Limit-Max	22V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Dual Supply Voltage	9V
Neg Supply Voltage-Max (Vsup)	-22V
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	4mV
Power	YES
Input Offset Current-Max (IIO)	0.3μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

NE5534DR Product Details

NE5534DR Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. Op amp rates 4mV as input offset voltage. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. An 4mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 100dB for the time being. The op amp ic has 1 channels on it. The linear amplifier is packaged by using a TR axis.